Showing posts with label PC Errors and Solution. Show all posts
Showing posts with label PC Errors and Solution. Show all posts

Wednesday, 29 June 2011

PC Errors and Solution Part 1

1. MONITOR LED IS BLINKING
Check all the connections like Monitor Cable, Data cables,RAM, Display Card , CPU connections.

2. CONTINUOUS THREE BEEPS
Problem in RAM Connection.

3. THREE BEEPS
( 1 Long 2 Short)
Problem in Display Card Connection


4. THREE LONG BEEPS PERIOD WISE
Problem in BIOS or RAM (Basic Input Output System)

5. CONTINUOUS NON-STOP BEEPING
Key Board Problem (I.e.; Some Key is pressed for Longer time)


6. HDD LED IS GLOWING CONTINUOUSLY
Data cable to be connected properly (twisted cable).

7. NO DISPLAY ON THE SCREEN AT ALL
Hard Disk cable connected wrongly. Connect rightly seeing the Red mark (Faces power supply) and then Restart.

8. POWER LED IS OFF
a. Check main power cord
b. Check S.M.P.S.
c. Check Mother Board connection


9. SHOWING CMOS ERROR
Replace 3 Volt battery of Mother Board . Set Original Settings Manually.(Refer CMOS Setup chart)
Enter your search termsSubmit search form


10. SHOWING FDD ERROR OR FLOPPY DRIVE IS NOT WORKING PROPERLY
Check Power cord of FDD , Data Cables , set CMOS & Finally the Check drive.

PC Errors and Solution Part 2

1. SHOWING HDD ERROR OR HARD DISK FAILURE
a. Check Power Cord
b. Check connection of HDD
c. Check Data cable
d. Check Hard Disk parameters in CMOS or Auto detecting Setting Partitions by Fdisk Command, then format it to set track 0.

2. MOTHER BOARD HANGS DUE TO UNSTABILIZED POWER SUPPLY
a. Check S.M.P.S
b. RAM not functioning properly.
c. Software problem (due to using pirated software)
d. CPU fan not functioning properly.

3. DANCING SCREEN
a. Check Display card connection
b. Virus Problem
c. Video Memory Problem

4. SHAKING SCREEN
a. Earthing problem
b. Magnetic waves comes around.

5. CPU CABINET SHOCK
a. Check Earthing
b. Check main power cord.





6. NON-SYSTEM DISK ERROR

a. Floppy Drive having different disk (Non-Bootable Disk) OR CMOS Parameters for Hard Disk may not be set properly.
b. Hard Disk Partitions may not be created.
c. Hard Disk may not be formatted.

7. MISSING OPERATING SYSTEM
The System files missing namely Ie; command.com} - User File IO.SYS & MS_DOS.SYS } - Hidden Files. These above three files required for Start up of the system that can be transferred by using SYS C: Command OR While the time of formatting by using Format c:/u/s

8. MISSING COMMAND INTERPRETOR
May the file Command.com is corrupted OR Infected by Virus OR Some one has Erased it.

9. SHOWING I/O ERROR
a. The type of Hard Disk in CMOS may not be set properly.
b. Operating system used for formatting is not valid

10. SHOWING DIVIDE OVER- FLOW MESSAGE
a. May some Directories or Files crash with other files.
b. Use CHKDSK/F or SCANDISK Command to correct it.

Sunday, 26 June 2011

How Firewalls Work in Pc



firewall work-www.infoonblog.co.cc

There are mean people out there that want very badly to get into your system or network. Maybe they want to steal information, to simply cause as much destruction as possible, or to use your system for their own uses. If you're online a lot or have a broadband connection, the attempts to enter your system may be relentless.

I feel that there are three main areas of defense against these threats: Antivirus (of course), Firewall, and Spyware removal. With some programs being more important than others, but none being without importance. What I would like to do is give all of our readers at least a good concept of what
these Firewalls and Anti-virus programs do to protect your system. I'm going to attempt to highlight the functions of these utilities and even some good practices that you can implement.

This week I'll be discussing the first line of defense between you and the Internet firewall. A firewall isn't going to stop you from getting a lot of viruses out there, unless it's the kind of viruses that proactively scans systems for open ports like the 32.Sasser that has recently stepped onto the virus scene. Where firewalls really come into play is in the area of Internet or Network access.
There are two basic types of firewalls: hardware and software.

A common hardware firewall is a routers. In a small network it sits inbetween your PC and modem. These firewalls feature the ability to hide your PC from others on the Internet by assigning you private IP addresses through a process called NAT (Network Address Translation) or DHCP (Dynamic Host Configuration Protocol).

I may have lost some people there who are not familiar with IP addressing. This can get confusing rather quickly. To put it simpler: a router will take the Internet address that your ISP has doled out to you and give the PCs the are connected to the router a generic private IP address (not valid for the internet). The other primary job is to close ports (these are numbers that are associated with certain jobs, for example most email clients and servers use SMTP port 25 and POP3 port#110) ports can be a vulnerability as seen in the past and a hacker can have an easy time getting into your PC with ports wide open to the world. When hackers try to scan your network for known vulnerable ports the Firewall simply drops the packets because they contain data that no PC on the network requested.

Software firewalls are a little bit different and they have good points and bad points. First let me start by saying that it is always better to have a firewall then not to. The main difference between the two styles of firewalls is that one is an external device that runs on it's own hardware. The software firewall is an application that runs on your PC. This is the one down side I believe because it's one more application running on your PC while you're trying to surf the web and can cause resource overhead and slow things down in older PCs. In concept the firewalls really are the same, except that one of the biggest differences is a software firewall doesn't have any address translation services (i.e. NAT or DCHP).

Software firewalls do have some really great features however. For instance, a software firewall is great for someone who is new to this area of PCs and wants to learn more. I say this because most of these firewalls have a reasonably easy to understand interface different from the more "Techie" looking router interfaces.

Software firewalls also have a feature for Internet access that I think is very informative, for example in most of the software firewalls I have come across when a program tries to access the internet the firewall will pop up and ask you if you want this action to be allowed every time, prompt every time, or deny Internet access to the program. Most software firewalls will also notify you when someone from outside is hitting your firewall and a lot of times you get the IP address of the party on the other end of the actions. Both of these features can be used to further protect your PC, in some cases you might even be able catch a hacker trying to get into your PC by getting their IP address and then asking there ISP what this IP address is doing pinging your IP address.

I've actually helped one of customers do this they called me up and said that there firewall kept making noises and popping up with windows saying that there was some activity on here firewall. She said that this had been going on for a couple of days. Well we opened up the interface and looked at the log describing what the activity was and from whom it originated. There were a bunch of pings hitting her firewall, but the software gave us the IP address, and from there we opened up a command line and pinged the IP address back and it came up with their ISP's domain name. She called that ISP and talked to them about this address and what has been going on. I wouldn't be surprised if he was kicked from his Internet service.

Related Posts Plugin for WordPress, Blogger...